CASE CX27B Mini Excavator
The CASE CX27b mini excavator is a piece of construction equipment that punches well above its size. Given its utility, compact frame and operating weight (5,556 lbs), it works well in urban construction environments, agricultural applications, landscaping jobs, and on infrastructure projects.
CASE CX27B Swing Boom/Stick Specs
The CASE CX27b has a max digging depth of 8.4 ft, a max cutting height of 14.7 ft , a max loading height of 10.5 ft, a max reach along the ground of 14.9 ft, and a max vertical wall digging depth of 7.6 ft. The swing speed on the swing mechanism is 8.7 rpm. The shipping height of the entire unit is just 8.3 ft, and the shipping length of the unit is 14 ft.
CASE CX27B Engine
The CX27B engine model, the Yanmar 3TNV82A-B, is a diesel engine. Water cooled, its 3 cylinders boast a net power of 24 horsepower (hp) or 18.1 kW at 2,200 rpm. It has a max torque of 58.3 lbs measured at 1,320 rpm.
CASE CX27B Bucket Specs
When it comes to bucket specs, the CX27B is on the smaller side like a majority of mini excavators on the market. Still, it's a bucket size that will work to get most smaller jobs done quickly and efficiently. How big is the bucket? The maximum bucket capacity on a CX27B is .2 cu yds, while the reference bucket capacity is .1 cu yds.
CASE CX27B Dimensions
Due to its compact size, the CX27B is ideal in tight environments. The top of cab height is 8.2 ft. The width of the excavator to the outside of tracks is a mere 5 ft, and the length of steel or rubber track along the ground is just a little over that at 5.3 ft. With a ground clearance of 0.9 ft, the CX27B still has the room it needs to maneuver uneven terrain.
CASE CX27B Undercarriage
As was mentioned earlier, the CX27B has a good amount of ground clearance at .9 ft. It can travel at a max travel speed of 2.5 mph, and it has a drawbar pull of 6,361 lbs. It has four track rollers per side and a shoe size of 9.9 inches. Its ground pressure is just 4.1 psi, so you can trust it to operate on less than ideal ground conditions.
Operating Specifications for the CASE CX27B Excavator
The hydraulic system on the CX27B has a hydraulic pump flow capacity of 14 gallons per minute and a fluid capacity of 6.6. gallons. Its hydraulic system relief valve pressure is 3,336 psi. It has a fuel capacity of 7.4 gallons, so you can get plenty done before the machine is in need of a fill up. Mini Final Drives provides high-quality OEM and aftermarket mini final drives and travel motors for a wide variety of construction equipment, including other CASE mini excavators, as well as Bobcat, Kubota, Komatsu, JCB, and many more. Contact us today about your mini final drive needs.